UV-Aquafine
Aquafine Optima HX Series Filters
The Aquafine Optima HX series represents leading edge UV technology and provides the lowest installed capital and life cycle cost of any UV product on the market, featuring new state-of-the-art Low Pressure, High- Output lamp technology.
This new advanced UV technology greatly reduces the amount of lamps over the current standard low-pressure models.
Aquafine Optima HX Features and Options
- Lamp Out Alert (LOA)
- Viton® gasket and O-rings
- UV and temperature Monitoring System with standard or NIST traceable UV sensor
- RA15 finish available for specific units
- Stainless steel compression nuts
- Sanitary fittings
- Available with two-line or touch screen microprocessor controller
- Sample ports
- Validated lamps
- Compact design (smaller footprints)
- Download Optima HX Catalog (680 KB).
Ultra-Violet Unit – Replacement Parts – See Photo Below
- Stainlees Steel Nipple located on the unit.
- Quartz Sleeves which provide a barrier between the UV Lamp and water. they are manufactured to allow the passage of the UV radiation.
- O-Ring – Seals the quartz sleeve.
- Compression Nut – also known as a gland nut which water seals the quartz sleeve.
- UV Lamp
- Lamp Socket – Connects the power to the UV lamp.
- Lamp Cap – Secures the lamp socket to the compression not. Sometimes not present.
For replacement parts to be correct, we need the Model Number and Serial Number of the Unit along with the date built. This information is on the name plate of the unit. It is a good idea to get all the name plate data before trying to find the parts.
If you need replacement parts for your existing UV or a new UltraViolet System, please contact us.
Viton® is a registered trademark of DuPont Performance Elastomers.
Call us at 603-434-9577 or contact us for more information.